Tips For Replacing a Window Handle
The replacement of the handle on your window is a simple task that can be accomplished in the comfort of your own home. Follow these steps to ensure a smooth and beautiful finish.
Start by removing the screws to reveal the screws within your uPVC window handle. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Take a measurement of the Spindle Length
It is essential to get the spindle size right when replacing the window handle. It can affect the tightness or elasticity of the handle as well as whether the handle locks correctly into the frame of the window. The spindle is a metal shaft that connects to the handle and to the lock within the frame of the window. The spindle can be found in the standard cross-section of 8mm for industry or older versions that measure 9mm. The current industry standard is 8mm, but this was not always the case so when buying a new handle it is essential to verify the dimensions.
The easiest way to measure the spindle length is to remove the handle that is currently in place This can be accomplished by turning it to the open position, then unscrewing the two screws (which may be hidden behind plastic caps that will require removal) that retain the handle. Once the handle has been removed, take a measurement from the base to the end. This will give you the measurement required to purchase a replacement.
There are many options available when you are looking to pick the perfect window handle. From sleek chrome that will fit into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled mongoose tail latches. There are many options, but the most important is to select one that complements your home's decor.
Espag handles are commonly fitted to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles vary between 58mm and 62mm however there are replacements for both sizes. Cadenza window handles have distinct dimensions due to their angled blade which operates the multi-point lock mechanism within the window.
When choosing a window handle, you should also consider the hand you use to open your door. Inline Espag window handles aren't hand-operated and can be used for left or right handed windows. Cranked window handles can only be used for windows that open in one direction.
2. Take the handle off
A window handle that is sagging is a frustrating experience, regardless of regardless of whether the handle has been damaged or worn out. However, the good part is that replacing the uPVC window handle is a simple task you can complete yourself. All you need is some basic tools and a bit of time to complete the job.
First, you have to open the window and ensure that it's in an unlocked position. Then, take off upvc door handles repairmywindowsanddoors that hold the handle in position. After these have been removed, you can begin to work on removing the handle itself.
The handle is attached to a spindle in the window frame. The handle is fixed by screws or pins, depending on the type of handle. The most popular types of handles are inline Espagnolette handles and cockspur handles. Both kinds of handles are found on casement windows, including aluminum ones. The handles can be locked with a key in order to stop unauthorised access from outside. You can also lock the handles by turning them clockwise.
To remove the handle you will need to use a flat blade screwdriver to remove the clip that holds the handle. Once the clip is released, the handle will slide off the spindle. After the handle has been removed, you will be required to measure the length of the spindle and ensure that your new handle is compatible with this measurement.
Once you have the proper size, you are able to screw the new handle in place. It is important to ensure that the handle is securely fastened and that it is rotating in the proper direction (clockwise when the handle is open, or counterclockwise if the handle is closed). It is also essential to make sure that it has not been fitted upside down.
Replace the cap screws. After you've done that then you can test the handle to ensure that it functions properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked and back.
3. Take the Screws off
A uPVC window handle is a crucial element of any home and is usually the first item to show signs of wear and wear and tear or damage. It can be caused by natural factors or through regular use, or malicious damage caused by opportunistic criminals who wish to open a locked window to gain access to your property. A simple repair can fix the issue and prevent it from repeating itself.
uPVC handles could also be difficult to remove if the locking mechanisms aren't functioning correctly. Often, the problem can be solved by replacing the multipoint lock rather than the entire handle and it's worthwhile to check this out as it can save you money.
After you have removed the handle, you'll need to remove the screws that secured it. They are usually located on the inside face of the base of the handle. It is possible to use a screwdriver do this. Be cautious not to over tighten the handle, as this can cause it to become loose.
Then, you'll have to locate the screws or pins that secure the handle. They're usually on the inside of the handle base. You will need an instrument to remove them. If you'd like to replace them, you should replace the caps on the screw and check the handle to ensure it functions properly.
If you're ready to put in the new handle, simply align the spindle with the cut-out in the window mechanism and screw in the appropriate position. If you're looking to replace the screw covers ensure that the handle is in an open position and any screws are securely attached. After this is done, you're done and are able to enjoy your new window handle. This will hopefully help you avoid expensive window and door replacements in the near future. If you'd like to get more assistance in this, or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the new handle
The replacement of a damaged window handle or updating it is simple and can be accomplished in a few easy steps. Identifying the kind of window handle, determining the length of its spindle and knowing what tools you'll need to complete the task are essential. Safety is always the top priority when working with windows and tools. It is also essential to take your time and follow the steps to ensure you have a functioning handle that is safe to use.
The first step is to find the screws holding your existing window handle in place. Then, remove them, while keeping an adequate grip on the handle itself to prevent it from falling and causing injury. Once the screws have been removed and repositioned, they can be put in a secure location to be replaced later.
After you have removed the handle, you can now begin to put in your new one. It is essential that the handle is fitted perfectly so that it works properly and locks the window in place. The next step is to slide the square metal bar on the back of the handle into the hole of your window mechanism, ensuring that it is secure.
After the new handle is in place, the final thing to do is replace the caps on the screws and verify that it functions. If you're not satisfied with the result or if the window does not open and close as it should then the next step is to call our experts who can assist you.
The majority of UK homes have uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of wear and tear or breakage. Anyone with a bit of DIY experience can easily complete the task. It is crucial that the handle you select matches the size and style of the window. If you're unsure about what type of handle you need, feel free to reach out to our team, who will be able to provide you with the choices available.